DAB JET 151 M Self priming centrifugal pump 1.5 Hp Single-phase Cast-iron

TECHNICAL DATA
Operating range:
from 0.4 to 10.5 m3/h with head up to 62 metres.
Liquid quality requirements: clean, free from solid or abrasive
contaminants, non-viscous, non-aggressive, uncrystallised and chemically
neutral, close to the properties of water.
Liquid temperature range:
for domestic use: from 0°C to +35°C (EN 60335-2-41)
for other use: from 0°C to +40°C
Maximum ambient temperature: +40°C
Maximum operating pressure: 8 bar (800 kPa)
Installation: fixed in a horizontal position.
Special executions on request: different frequencies and/or voltage.
Motor protection rating: IP 44
Terminal block protection rating: IP 55
Insulation class: F
Standard input voltage: single phase 220/240 V / 50 Hz

APPLICATIONS
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations.
Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.

CONSTRUCTIONAL FEATURES OF THE PUMP
Cast-iron motor support and pump body.
Impeller, diffuser, venturi tube and sand guard in technopolymer
Twin impeller on the JET 151 and 251 versions.
Stainless steel wear ring.
Carbon/ceramic mechanical seal.

CONSTRUCTIONAL FEATURES OF THE MOTOR
Asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.
Incorporated thermo-amperometric protection and permanently inserted capacitor in the single phase version.
It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.
Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).