DAB JETCOM 132 M Self priming centrifugal Water pump 1,36 HP Single-phase
SKU # 102662100 - Availability 10 pz
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles.
Suitable for pumping water with low levels of sandy impurities.
Especially used in domestic water supply installations. Suitable for small farms and gardening, small scale industrial services and where self priming is
CONSTRUCTIONAL FEATURES OF THE PUMP
Pump body in technocpolymer and motor support in die cast aluminium.
Impeller, diffuser, venturi tube and sand guard in technopolymer
Stainless steel wear ring.
Carbon/ceramic mechanical seal.
CONSTRUCTIONAL FEATURES OF THE MOTOR
Asynchronous type, closed, with external air cooling.
Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life.
Incorporated thermo-amperometric protection and permanently inserted capacitor in the single phase version.
It is recommended to use overload protection for three phase motor protection, in compliance with current legislation.
Manufactured pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41).
from 0.6 to 5.4 m3/h with head up to 54 metres.
Liquid quality requirements: clean, free from solid or abrasive contaminants,
non-viscous, non-aggressive, uncrystallised and chemically neutral.
Liquid temperature range: from 0°C to +35°C for domestic use
Maximum ambient temperature: +40°C
Maximum operating pressure: 6 bar (600 kPa)
Maximum suction depth: 8 metres.
Installation: fixed in a horizontal position.
Special executions on request: alternative voltages and/or frequencies.
Motor protection rating: IP 44
Terminal block protection rating: IP 55
Insulation class: F
Standard input voltage: single phase 220/240 V / 50 Hz
|Measure||(L) 414 mm * (A) 203 mm * (P) 263 mm|