DAB JETCOM 82 M Self priming centrifugal Water pump 0,8 HP 220/240 V
SKU # 102670020 - Availability 10 pz
Self priming centrifugal pump with excellent suction capacity even in the presence of air bubbles. Suitable for pumping water with low levels of sandy impurities. Especially used in domestic water supply installations. Suitable for small farms and gardening, small scale industrial services and where self priming is necessary.
CONSTRUCTIONAL FEATURES OF THE PUMP
Pump body, seal holder cover and wear ring in stainless steel. Motor support in die cast aluminium. Impeller, diffuser, venturi tube in technopolymer. Carbon/ceramic mechanical seal.
CONSTRUCTIONAL FEATURES OF THE MOTOR
Asynchronous type, closed, with external air cooling. Rotor mounted on oversized greased-for-life ball bearings, to guarantee low noise and long life. Incorporated thermo-amperometric protection and permanently inserted capacitor in the single phase version. It is recommended to use overload protection for three phase motor protection, in compliance with current legislation. Manufacture pursuant to CEI 2-3 and CEI 61-69 (EN 60335-2-41) standard.
Operating range: from 0.4 to 10.5 m3 /h with head up to 62 metres.
Liquid quality requirements: clean, free from solid or abrasive contaminants, non-viscous, non-aggressive, uncrystallised and chemically neutral.
Liquid temperature range: for domestic use: from 0°C to +35°C (EN 60335-2-41) for other use: from 0°C to +40°C Maximum suction depth: 8 metres.
Maximum ambient temperature: +50°C
Maximum operating pressure: 8 bar (800 kPa) Installation: fixed in a horizontal position.
Special executions on request: alternative voltages and/or frequencies.
Motor protection rating: IP 44
Terminal block protection rating: IP 55
Insulation class: F
Standard input voltage: single phase 220-240 V / 50 Hz
|Measure||(L) 48 cm * (A) 22 cm * (P) 25 cm|